Miele Heat pump dryer Operating Instructions Manual page 8

Warning and Safety instructions
Technical safety

Before setting up the tumble dryer, check it for any externally
visible damage.
Do not install or use a damaged tumble dryer.

Before connecting the tumble dryer, ensure that the connection
data on the data plate (fuse rating, voltage and frequency) match the
mains electricity supply. If in any doubt, consult a qualified
electrician.

Reliable and safe operation of this tumble dryer can only be
assured if it has been connected to the mains electricity supply.

The electrical safety of this tumble dryer can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt, please have the household
wiring system tested by a qualified electrician. Miele cannot be held
liable for the consequences of an inadequate earthing system (e.g.
electric shock).

Do not connect the appliance to the mains electricity supply by an
extension lead, multi-socket adapter or similar. These can overheat
and are a fire hazard.

If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.

Unauthorised repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele approved service technician, otherwise any
subsequent damage will not be covered by the guarantee.

Faulty components must only be replaced by genuine Miele
original spare parts. The manufacturer can only guarantee the safety
of the appliance when Miele replacement parts are used.

The tumble dryer must be isolated from the electricity supply in
the event of a fault and during cleaning and maintenance.
8