No Signal Power Down; Using Hdmi ® Cec - Toshiba 40L3400U User Manual

2 Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press the OK button. Or press
the ▲/▼(arrow) buttons to increase or decrease in 10-minute
increments (maximum of 12 hours).
If a power failure occurs, the sleep timer setting may be cleared.
To display the time remaining until the TV turns off, press the
SLEEP button.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.

No Signal Power Down

The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
Low signal strength of analog channel (no signal detection)
v
Only Audio L/R is connected to external input to listen to music
v
through the TV speakers.
To change the no signal power down setting:
1 From the Options menu, highlight Power Management, and
then press the OK button.
2 Highlight No Signal Power Down, and then press the OK
button.
3 Press the ▲/▼(arrow) buttons to highlight the item you want
to change, and press the ◄/►(arrow) buttons to select On or
Off.
v
v
Using HDMI
®
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI
remote via HDMI
When Enable HDMI CEC Control in the HDMI CEC Control
Setup menu is set to On (see
the HDMI
Default setting for this feature is On.
A warning message will appear 1 minute before the TV turns off.
CEC
®
(see
®
CEC functions described below will be enabled.
®
No Signal Power Down
Using HDMI® CEC
CEC compatible devices from the TV
"HDMI CEC connection" on page
®
"Setting up HDMI
Setting up your TV
CEC" on page
®
93
31).
96),