Denon RCD-M33 Service Manual page 9

Q Q
3 7 6 3 1 5 1 5 0
No Key name Function
E1-00 : Disc cannot be detected
E1-01 : Tracking offset adjustment not possible
E1-02 : Focus offset adjustment not possible
E2-00 : Focus servo could not follow during
playback
E2-01 : Focus servo could not follow during
searching
E2-03 : Focus servo could not follow during TOC
reading
E2-05 : Focus servo could not follow during
pause
E2-10 : Subcode can no longer be read during
playback
E2-11 : Subcode can no longer be read during
searching
E2-12 : Subcode can no longer be read during
TOC reading
E2-14 : Subcode cannot be read during pause
6.3 Error display
E2-15 : Subcode cannot be read during manual
search
E3-00 : TOC could not be read within specified
time
E3-01 : PVD/SVD analysis
completed within specified time
E4-04 : Search time out
completed within specified time)
T E
L 1 3 9 4 2 2 9 6 5 1 3
E4-05 : Decoder bus (Error in communications
with CD decoder)
E5-00 : Inner switch not on
E6-00 : Inner switch not off
E9-00 : Error in CD microprocessor
E9-01 : Other error
Press the key while the error is
displayed.
No. heat runs is displayed for 5 seconds, the
error display reappears.
Error display
6.4
switching (1)
Press the key while the error is
displayed.
The track no. and time when the error occurred is
displayed for 5 seconds, then error display
Error display
6.5 w w w reappears.
switching (2)
.
Display
lit
Upper : "_ CD _ _ _ _ _ _ _ _ EX-XX"
X-XX : Error display
Lower : "_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _"
could not be
(searching not
lit
Upper : "_ CD _ _ _ _ _ _ _ _ XXXX_"
Lower : "_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _"
XXXX : No. of heat run repetitions
Error display reappears after 5 seconds. See 6.3.
In cases other than when is lit, same display as
during normal playback.
x a o
y
Error display reappears after 5 seconds. See 6.3.
i
http://www.xiaoyu163.com
8
Q Q
3 7 6 3
u 1 6 3
.
9
http://www.xiaoyu163.com
9 2 4 9 8
1 5 1 5 0 8 9 2 4
m
c o
RCD-M35DAB/M33
2 9 9
9 8 2 9 9