Advertisement
3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS
Ref. No. 1A
Procedure 1A
Procedure 1A → → → → 1B
Ref. No. 1B
Removal of the Housing and the Fixation cover
assembly.
1. Loosen the screw turning it counterclockwise, using a coin or a
flat blade screwdriver.
2. Take out the belt hook.
3. Remove nine housing screws.
4. Open the housing B.
5. Take out the fixation cover, protectors and anvil block.
Removal and attachment of the Motor.
(Removal)
1. Take out the motor with the driving block from housing.
2. Separate the motor assembly from the driving block.
3. Take out the motor rotor assembly from the motor stator.
NOTE :
Make sure not to damage the magnet by motor rotor.
(Attachment)
1. Insert the motor rotor assembly into the stator.
NOTE :
Make sure that the motor stator has their own direction for proper
assembly. If it is assembled wrongly, the rotation may be the
opposite way.
3
EY7201-X8
Advertisement
