Advertisement
EY7201-X8
Ref. No. 1C
Procedure 1A → → → → 1B → → → → 1C
Procedure 1A → → → → 1B → → → → 1C→ → → → 1D
Ref. No. 1D
Removal of the Driving Block.
1. Remove the thrust plate.
2. Take out the planet gears and pins slightly tapping the driving block
on the table.
Assembly of the Switch.
1. Press fit the lead wires firmly.
2. Assembly the lever switch with a projection on top.
3. Connect the motor lead wires without touching (+) terminal and (-)
terminal.
4. Press fit the lead wires of LED light in a groove of F/R selector
handle.
4
Advertisement
