Advertisement
4 Disassembly/Assembly Instructions
*To assemble the tool, start with 4-5 and proceed to 4-1.
4.1. Removing the fixation cover and rubber cover.
4-2. Removing the handle hoop
4-3. Removing the housing
attaching
*Precautions when
cover
Attach the fixation cover, aligning the protruding part with the groove
on the housing. Attach the decorate cover, aligning the protruding
part with the notch on the housing.
6
Remove the decorate cover and fixation
cover from main tool.
the fixation cover and decorate
Pull on the handle hoop with a flat-
blade screwdriver or other suitable tool
and remove it from the housing.
Remove ten screws.
Advertisement
