Replacement Procedures
4.12 Cover assembly
Removing the cover assembly
The following describes the procedure for removing the cover assembly (See Figure 4-12-1
to 4-12-3).
1. Turn over the computer.
2. Remove the following screws securing the cover assembly from the back and bottom
of computer.
• M2.5×2.0
• M2.5×6.5
• M2.5×8.0
• M2.5×4.0
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
Figure 4-12-1 Remove the screws (back)
x5
x11
x6
x3
4-39