Toshiba Satellite P500 Maintenance Manual page 190

Replacement Procedures
Figure 4-6-3 Disassemble the bracket from slot in ODD
Installing an optical disk drive
The following describes the procedure for installing an optical disk drive.
4. Attach the ODD bracket to an optical disk drive and secure it with the following
screws.
• M2.0×2.0 Flat BIND screw
5. Insert an optical disk drive assembly into the slot and connect it to the connector
CN26 on the system board.
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
x4
4-20