Wiring; Installing Optional Fans - Montigo B34DV Indoor Installation, Operation & Maintenance Manual

Wiring

OPTIONAL
BATTERY
PACK
1.5V AA type
1.5V AA type
1.5V AA type
1.5V AA type
Wiring for the optional Fan Kit
All B-Series DV-2 fireplaces may be equipped with optional fan kits for
circulating heat into the living space.
Installations in Canada which employ the fans must be electrically
grounded in accordance with CSA C22.1 Canadian Electrical Code
Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be grounded in
accordance with local codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70-1987.
For more information see the Fan Kit Installation Guide included with
the fan kit.
NOTE: If any of the original wire supplied with the appliance is replaced, it
must be replaced with the same type, or its equivalent.
Part No. XG0160 - 141231
Installation
SPARK
RED
BLACK
SENSOR
TO ON/OFF
WHITE
BLACK
WALL SWITCH
BLUE
WHITE
OPTIONAL CPI/IPI SWITCH
YELLOW/GREEN
ORANGE
GREEN
LED Lights
LED1 - Red LED
LED2 Amber LED
Figure 24. Wiring Diagram for the SIT Proflame 2 Electronic Ignition
X2
X1
X3
X4
6
X5
10
4
6
3
4
SW1
115/1/60 Supply
G
Quick Connect
plug to motor
Figure 25. Wiring schematic for optional fans.
B-Series DV-2 Gas Fireplace
GREEN
WHITE
BLACK
To PPO
L1 L2
L2-WH
G L1-BLK
Page 13