Borderfree Copy - Epson Stylus CX3700 Service Manual

EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850

1.4.4.2 BorderFree Copy

The following table shows the relative positioning of the original and copy.
Table 1-29. Original (scanner)
RW OLM
(readable width)
(out-of-range left margin)
216 mm (8.5") 1.5 mm ± 1 mm
Table 1-30. Copy (printer)
RO LO
2.5 mm 2.5 mm
Note : Refer to "1.2.1.4 Paper Support" (p.11)
PRODUCT DESCRIPTION
RL OTM
(readable length)
(out-of-range top margin)
297 mm (11.7") 1.5 mm ± 1 mm
TO BO
3.0 mm 5.0 mm
for paper width (PW) and paper length (PL).
Stand-alone Copy
TO
Right side of copy
PW Top
LO
Print direction
*1 *2
Scan direction
OLM
RW Top
Right side of original
OTM
Note *1: This indicates the top left corner of the original. Normally, this corner is aligned
with the scan bed's top right corner as the reference point.
*2: This indicates the scan start position at the top left of the original, which
corresponds to the print start position at the top left of the copy. The bottom right
corner of the print area varies according to the scale setting in the print area.
Figure 1-11. BorderFree Copy
Revision A
PL BO
Copy
Print area
Copy paper
Original
(face down)
Scan area
Scan bed
RL
25