Adjusting The Fork And Shock Absorber; Adjusting Compression Damping Of Fork; Adjusting Rebound Damping Of Fork - KTM 990 SUPER DUKE, 990 SUPER DUKE R Owner's Manual

Ktm owner's manual motorcycle 990 super duke, 990 super duke r
Hide thumbs Also See for 990 SUPER DUKE, 990 SUPER DUKE R:
Table of Contents

Advertisement

MAINTENANCE WORK ON CHASSIS AND ENGINE
Super Duke
BASIC SETTING
FORK WP 4860 ROMA
Compression adjuster (clicks) 20 15 10 10 18 18 14 18
Rebound adjuster (clicks) 20 15 10 10 16 16 12 16
Spring preload (turns)
5 5 5 5 5 5 5 5
1
2

Adjusting the fork and shock absorber

Super Duke R
There are a number of ways to adjust the fork and shock absorber to match the chassis to
your driving style and the payload.
We have provided a table with pragmatical values to help you tune up your motorcycle. These
tune-up specifications are reference values only and should serve as a basis for your per-
sonal chassis and suspension tuning. Do not make arbitrary changes to the settings (maxi-
mum ±40%) since this may impair the handling characteristics (particularly in the high-
speed range).
Make sure both fork legs are equally adjusted.
A sticker with the basic settings is located under the seat.

Adjusting compression damping of fork

Hydraulic compression damping determines the reaction when the fork is compressed.
Turn the adjusting screws [1] clockwise to increase damping, turn it counterclockwise to
reduce damping during compression. Make the same damping rate adjustment to both fork
legs.
STANDARD ADJUSTMENT
– Turn adjusting screw clockwise as far as it will go.
– Super Duke: Turn 15 clicks in a counterclockwise direction.
– Super Duke R: Turn 18 clicks in a counterclockwise direction.

Adjusting rebound damping of fork

Hydraulic rebound damping determines the reaction when the fork is rebound. By turning
the adjusting screw [2] (REB), the degree of damping of the rebound can be adjusted. Turn
the knob clockwise to increase damping, turn it counterclockwise to reduce damping dur-
ing rebounding. Make the same damping rate adjustment to both fork legs.
2
STANDARD ADJUSTMENT
– Turn adjusting screw clockwise as far as it will go.
– Super Duke: Turn 15 clicks in a counterclockwise direction.
– Super Duke R: Turn 16 clicks in a counterclockwise direction.
»
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents