Installation; Ac Power - Martin EFX500 User Manual

Installation

A C p o w e r
Warning! Ensure that the fixture's voltage setting matches your local AC
power voltage before applying power.
For protection from fire and electric shock, the fixture must be grounded
(earthed). The power supply must have both overload and ground-fault
(earth fault) protection.
Check that power cables are undamaged and rated for the current
requirements of all connected devices before use.
Important! Do not connect the fixture to a dimmer system, as this may
cause damage that is not covered by the product guarantee.
Mania EFX500 power settings
All Mania EFX500 models must be set to 115 V, 60 Hz or 230 V, 50 Hz AC
power using the red voltage selector switch on the connections panel.
• Set the switch so that 115 V is visible if you have110-120 V, 60 Hz AC
power.
• Set the switch so that 230 V is visible if you have 220-240 V, 50 Hz AC
power.
Mania EFX600, EFX700 & EFX800 power settings
• Mania EFX600, EFX700 and EFX800 EU models can be set to 230 or
240 V, 50 Hz AC power using the switch on the connections panel. Use
the 230 V setting if you have 220-230 V power, and use the 240 V
setting if you have 230-240 V.
• Mania EFX600, EFX700 and EFX800 US models do not have a voltage
selector switch and are supplied set up for 110-120 V, 60 Hz AC power.
Warning! Do not operate the fixture if local AC power voltage is outside the
range specified for the fixture.
P ower pl ug s
Mania EFX fixtures are supplied with power cables to match most local
power outlet sockets (see "Included items" on page 50), but if there is no
8 Mania EFX user manual