Introductory Information; Commissioning; Your System Is Preset At The Factory; Certification Details - Viessmann VITODENS 100-W Operating Instructions Manual

Commissioning

The commissioning and matching of
the control unit to local and structural
conditions must be carried out by your
local CORGI registered gas installer.

Your system is preset at the factory

The control unit is factory-set to stan-
dard operation.
This means that your heating system
is ready for use.

Certification details

The Vitodens 100-W is certified to
comply with the requirements of rele-
vant European Directives (90/396/
EEC, 73/23 EEC and 92/42/EEC) for
use in Great Britain and Ireland with
gas category I2H (G20 with a gov-
erned gas supply at 20 mbar (8 in.wg)
inlet pressure).

General Description

The Vitodens 100-W is a fully auto-
matic, wall mounted, fan assisted
balanced flue condensing boiler for
use with natural gas (G20) at 20 mbar
(8 in.wg) supply. For use in sealed or
open vent systems.

Introductory information

The factory-selected standard set-
tings can be modified to your indivi-
dual requirements.
Note
All data is saved in case of power fail-
ure.
The appliance classification is either
C or C depending upon whether
13x 33x
a horizontal or vertical flue terminal is
used.
The unit provides central heating with
output between 8.0 kW to 13.0/18.0
kW/240.0 kW. If required, the central
heating heat output can be range-
rated to suit the system requirements.
Heat output is automatically con-
trolled according to demand.
5