Fitting Glass Fiber Yarn Filling Of Main Silencer; Changing Glass Fiber Yarn Filling Of Main Silencer; Dismounting The Air Filter Box Lid; Installing The Air Filter Box Lid - KTM 450 SMR Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Fitting glass fiber yarn filling of main silencer

Changing glass fiber yarn filling of main silencer

Remove glass fiber yarn filling of main silencer. (
Fit the glass fiber yarn filling of the main silencer. (

Dismounting the air filter box lid

Installing the air filter box lid

x

Removing the air filter

Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Problem materials cause environmental damage.
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
x
Check parts for damage and wear. Replace damaged or worn parts.
Attach the glass fiber yarn filling to inner tube
tube .
Insert cap
Attach the glass fiber yarn filling to insert
Mount and tighten screws.
Insert end cap
Fit the main silencer. (
500226-11
x
P. 57)
P. 58)
Pull off the air filter box lid in area
500222-10
Check parts for damage and wear. Replace damaged or worn parts.
Insert the air filter box lid into the rear area
500222-11
Dismount the air filter box lid. (
Undo the hose clip
Remove the air filter.
500223-10
. Mount and tighten screws.
. Mount and tighten screws.
P. 57)
to the side and remove to the front.
P. 58)
.
. Fit the inner tube into the outer
. Fit the insert into the outer tube
and clip it into the front area
58
.
.