Adjusting The Clock; Setting The Timer - Yamaha MCR-550 Owner's Manual

USING USEFUL FUNCTIONS

■ Adjusting the clock

AUTO CLOCK: Automatic adjustment function is available for U.K. and Australia models only. To apply for this
function, set AUTO CLOCK to ON.
CLOCK SET: To set hour and minute, repeat steps 3 and 4 on page 17.
y
• You can enter CLOCK SET directly by pressing and holding CLOCK when the unit is on.
• When setting the clock, you can also use the Numeric buttons to enter the hour and minute. To confirm the entry, press ENTER.
To clear the entry, press CLEAR.
• The current time appears on the front panel display for a certain period by pressing CLOCK when the unit is on.
Note
The time setting will be lost if you disconnect the power cable from the wall outlet for several minutes.

■ Setting the timer

TIMER SET: To select the following setting items, repeat steps 3 and 4 on page 17.
y
You can enter TIMER SET directly by pressing and holding TIMER.
Time (hour and minute)
y
You can use the Numeric buttons to enter the hour/minute, track/file number, preset number and volume when you are
setting the timer. To confirm the entry, press ENTER. To clear the entry, press CLEAR.
Input source and track/file number or preset number
Note
If the source is not set properly, the timer sound will not be heard. Make sure that the source is set securely.
CD:
Set a track/file number.
If you set the track/file number which is not exist, the first track/file is played back automatically.
USB:
Set a file number.
If you set a file number that does not exist, the first file is played back automatically.
iPod:
When you select the iPod as a source, this unit resumes the music that you were listening to last time.
FM:
Set preset number.
By selecting "– – –", the FM station you set last time is set.
DAB (U.K. and Australia models):
Set preset number.
By selecting "– – –", the DAB station you set last time is set.
Volume
The volume level can be set between "1" - "MAX" (60) and "– – –"
standby mode, the volume is set at this point is used. When the timer is executed while the unit is on, the
volume level remains the same as the current volume.
* If you set your volume to "_ _ _" when the timer is set while the unit is in standby mode, the volume level is set at the
same level as input source.
Timer on (TIMER EVERY/TIMER ONCE)/Timer off (TIMER OFF)
Switch the timer to TIMER EVERY/TIMER ONCE/TIMER OFF. When the timer is set to TIMER EVERY or
TIMER ONCE, the TIMER indicator lights up on the front panel display.
y
This setting is also available with TIMER (p. 16).
18
En
. When the timer is set while the unit is in
*