Using The Built-In Timer; Setting The Clock; Adjusting The Brightness Of The Display - Yamaha CRX-E150 Owner's Manual

Setting the clock

You must set the clock before you use the timer functions.
The clock is based on a 12-hour system for U.S. and
Canada models, and 24-hour system for Australia model.
DISPLAY
NATURAL SOUND CD RECEIVER CRX-E150
STANDBY/ON
TIMER
STANDBY
MEMORY AUTO/MAN'L PRESET/BAND
DISPLAY
TIME ADJ TIMER
PHONES
TIME ADJ PRESET/BAND
1
While the power is on, press DISPLAY to display
the time.
2
While holding TIME ADJ, press HOUR to set the
hour.
• If you want to move the time in the reverse
direction, press HOUR while holding TIME ADJ
and PRESET/BAND.
3
While holding TIME ADJ, press MIN to set the
minutes.
• If you want to move the time in the reverse
direction, press MIN while holding TIME ADJ
and PRESET/BAND.
To display the clock
Press DISPLAY.
The current time appears for about 8 seconds, then the
normal display returns.
Note
• In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
HOUR MIN
VOLUME
MIN MAX
PRESET/TURING
HOUR MIN
INPUT
BASS TREBLE BALANCE
– + – +
L R

USING THE BUILT-IN TIMER

Adjusting the brightness
of the display
You can adjust the brightness of the display. If you have
connected cassette deck (KX-E100) and/or MD recorder
(MDX-E100) to this unit, the brightness of the displays is
automatically adjusted to that of this unit.
DISPLAY
NATURAL SOUND CD RECEIVER CRX-E150
STANDBY/ON
TIMER
STANDBY
DISPLAY MEMORY AUTO/MAN'L PRESET/BAND
TIME ADJ TIMER
PHONES
–
Press and hold DISPLAY for about two seconds so that
"Dimmer ±0" appears on the display. While holding
DISPLAY, turn INPUT clockwise to increase or
counterclockwise to decrease brightness.
Control Range: ±0 to –6 (Preset value: ±0)
VOLUME
MIN MAX
PRESET/TURING
HOUR MIN
INPUT
BASS TREBLE BALANCE
+ – +
L R
INPUT
15