Section 3 - Configuration
This page allows you to set up a VPN using either PPTP or L2TP.
PPTP/L2TP:
Check this box to enable PPTP/L2TP settings.
Name:
Enter a name for your VPN.
Connection Type:
Select PPTP or l2TP.
VPN Server IP:
Enter the IP address of the VPN server.
Remote IP Range:
Enter the remote IP range in the boxes.
Authentication
Choose PAP, CHAP, or MS-CHAP.v2 for your authentication.
Protocol:
MPPE Encryption
Choose either RC4, None, 40.bit, or 128.bit to determine the strength level of your authentication.
Mode:
Extended
If you wish to use extended authentication, choose a group from the drop-down menu.
Authentication:
D-Link DIR-140L User Manual
PPTP/L2TP Settings
42