Pptp/L2Tp Settings - D-Link DIR-840 User Manual

Section 3 - Setup
This page allows you to set up a VPN using either PPTP or L2TP.
PPTP/L2TP: Check this box to enable PPTP/L2TP settings.
Name: Enter a name for your VPN.
Select PPTP or L2TP.
Connection Type:
VPN Server IP:
Enter the IP address of the VPN server.
Remote IP Range:
Enter the remote IP range in the boxes.
Authentication Choose PAP, CHAP, or MSCHAP.v2 for your authentication.
Protocol:
MPPE Encryption Choose either RC4, None, 40.bit, or 128.bit to determine
Mode:
the strength level of your authentication.
Extended
If you wish to use extended authentication, choose a group
Authentication: from the drop-down menu.
D-Link DIR-840 User Manual

PPTP/L2TP Settings

47