Housing Ass'y Removal; Laser Pick-Up Removal - Denon DCD-3560 Service Manual

I
I
L)
• Housing Ass'y Removal
• Removing 4 screws
®
1,
®
2 enables detaching the
laser pick-up magnet, yoke, turntable, and spindle
motor as one assembly.
• Unfastening screws @ 1, @2 pemits disassembling
the parts for floating as illustration shows.
• A common type are used for F cover and H damper,
but the 2 different types are utilized for coil spring
and collar to keep balance. Remind this at the time
of assembling.
A -1
4630515000 4330485100
Coil spring
(0)
Collar (8)
A -2
4630514001 4330514107
Coil spring (C) Collar (C)
• Coil Spring (0) (utilizing 3 each) is marked in red.
• Coil Spring (C) (utilizing 1 each) is without marking.
• Collar (C) (utilizing 1 each) is nickel plated brass.
• Collar (8) (utilizing 3 each) is black plated brass.
t=
; : 1 ~ : ' ~ " :
,eJ.
' 0 '
~H.Damper
0--
Color (B), (C)
MOTOR DRIVE
P.W.B.
• Laser Pick-up KSS-151A Removal
(1) Remove the housing ass'y in the first place, then
loosen the screw (refer to "Mechanism Exploded
View"
@)
mounting the turntable, and detach the
turntable.
(2) Unfasten 2 screws
®
and detach the spindle motor
ass'y.
(3) Remove 6 screws
®
as indicated in the illustration
of "Housing Ass'y Removal",
(4) Unsecure 2 screws
@
and unsolder 2 places
®
and
detach the speed detection coil.
(5) Remove 2 screws
©
and unsolder 2 places
@
and
detach the drive coil.
(6) Pulling out the shaft in the portion
®
permits
detaching the Laser Pick-up.
17