Page 1
CD PLAYER DCD-F102 OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI ISTRUZIONI PER L’USO INSTRUCCIONES DE FUNCIONAMIENTO GEBRUIKSAANWIJZING BRUKSANVISNING...
Page 2
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE SUPER AUDIO CD PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. • DECLARATION OF CONFORMITY...
Page 3
2 NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA • Keep the apparatus free from moisture, water, and dust. • Halten Sie das Gerät von Feuchtigkeit, Wasser und Staub fern.
Page 4
ENGLISH DEUTSCH FRANCAIS ITALIANO A NOTE ABOUT RECYCLING: This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning chemical waste.
Getting Started Thank you for purchasing this DENON CD Player. Please read the operation instructions thoroughly in order to acquaint yourself with the CD player and achieve maximum satisfaction from it. Be sure to keep these instructions for future reference, should any questions or problems arise.
• Note that the illustrations in these instructions may differ from the actual unit for explanation purposes. NOTE: • This CD player uses a semiconductor laser. To ensure stable operation, it is recommended to use the set indoors at a temperature of 5°C (41°F) ~ 35°C (95°F).
Getting Started Cautions on loading discs • Only load one disc at a time. Loading two or more discs can damage the set or scratch the discs. • Do not use cracked or warped discs or discs that have been repaired with adhesive, etc.
ENGLISH Getting Started Part names and functions For buttons not explained here, see the page indicated in parentheses ( ). Front panel Power operation switch (ON/STANDBY) ···········································(7) Power indicator···········································(7) Display··························································(4) Skip buttons ( ) ·················(8, 9, 11) 8, 9 Search buttons ( )·························(8) 6, 7 Display...
To ensure performance and safety, it is recommended to arrange the components as shown below when connecting to models in the F102 series. DCD-F102 NOTE: • Arrange in such a way that the receiver’s ventilation holes are not obstructed so that the heat can dissipate.
• Do not unplug the power supply cord while the system is operating. • The maximum total power consumption of devices connected to the DCD-F102’s AC outlets is 60 W. Do not connect devices with power consumptions greater than 60 W.
Operation < > <ON/STANDBY> When the DCD-F102 and receiver (DRA-F102/F102DAB) are connected using system connections, the DCD-F102 can be operated using the system remote control (RC-1034) unit included with the receiver. [POWER OFF] [TIME/DISPLAY] About the button names in this explanation <...
ENGLISH Operation < > < When the DCD-F102 and receiver (DRA-F102/F102DAB) are connected using system connections, the DCD-F102 can be operated using the system remote control (RC-1034) unit included with the receiver. [PROG] [REPEAT] [RANDOM] [CALL] [NUMBER] (1~10, +10) [CLEAR/DEL] About the button names in this explanation <...
Operation ¢ To change a programmed track: In the stop mode, use [PROG] to turn off the programmed track number display, then perform steps over. ¢ Clearing tracks from the program: In the stop mode, press [CLEAR/DEL]. The last track in the program is deleted each time the button is pressed.
¢ Order in which the folders are played If there are multiple folders containing MP3 or WMA files, the DCD-F102 automatically assigns the folders numbers when reading the disc. The folders switch according to the numbers they have been assigned. If there are no playable files in a folder, that folder is ignored.
Operation < > < > When the DCD-F102 and receiver (DRA-F102/F102DAB) are connected using system connections, the DCD-F102 can be operated using the system remote control (RC-1034) unit included with the receiver. [RANDOM] [REPEAT] [FOLDER MODE] [FOLDER] [TIME/DISPLAY] About the button names in this explanation <...
The compatible bit rate range is 32 to 320 kbps for MP3 files, 64 to 160 kbps for WMA files. We recommend using MP3 files with bit rates of 128 kbps or greater on the DCD-F102. • Be sure to add the extensions “.MP3” or “.WMA” to MP3 or WMA files, respectively.
System Operations When this set is used with other components in the F102 series, it is possible to perform such system operations as synchronized recording of CDs and to operate all the components with the system remote control unit (included with the receiver (DRA-F102/F102DAB)). •...
• The power of the various components turns on and the receiver’s function automatically switches to “CD”. • When a disc is loaded in the DCD-F102, the disc starts playing. The auto power on function does not work even when < CD is pressed.
A and B. “OVER” is displayed on the DCD-F102’s display if there are tracks that cannot be recorded. If “OVER” is displayed, change the length of the cassette tape as described in step •...
ENGLISH Others Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct ? 2. Have you operated the player according to the Operating Instructions ? If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
Page 21
TOKYO, JAPAN www.denon.com Denon Brand Company, D&M Holdings Inc. Printed in China 00D 511 4463 004...