Icom IC-F7000 Service Manual Addendum page 31

M ENTERING THE ADJUSTMENT MODE
q Turn the power OFF.
w Push and hold the HM-146's [CALL] and RC-26's [EMG] switches, then turn the power ON.
[CALL]
M OPERATING ON THE ADJUSTMENT MODE
• Enter the TX adjustment from the MAIN menu.
• Enter the RX adjustment from the MAIN menu.
• Change the adjustmet value.
• Write the adjustment data to the memory, and
then change the next adjustmet item.
• Selects the next adjustment item.
• Selects to the previous adjustment item.
TX ADJUSTMENT ITEM CHANGING
[1]
MAIN
menu
[CLR]
RX ADJUSTMENT ITEM CHANGING
[2]
RX total
MAIN
menu
[CLR]
Connect to [MIC] connector.
[0] [0]
TX TX TX power
set gain (High)
[CLR] [CLR]
[0]
[0]
S level
zero
gain
[CLR]
[CLR]
[POWER] [EMG]
: Push the RC-26 [1] button
: Push the RC-26 [2] button
: Turn the RC-26 [VOL]
: Push the RC-26 [OK] button
: Push the RC-26 [0] button
: Push the RC-26 [CLR ] button
[0] [0]
TX power
(Middle)
[CLR] [CLR]
S level
8
5 - 2
[0] [0]
TX power SWR
(Low) 1.0
[CLR] [CLR]
SWR
2.0