Specifications - JVC KD-R961BT Instruction Manual

TROUBLESHOOTING
Symptom Remedy
"BT DEVICE NOT The unit failed to search for the registered Bluetooth
FOUND" devices during [AUTO CNNCT]. Turn on Bluetooth from
your device and connect manually. ( 13)
"NOT SUPPORT" The connected phone does not support Voice Recognition
feature.
"ERROR" Try the operation again. If "ERROR" appears again, check if
the device supports the function you have tried.
"H/W ERROR" Reset the unit and try the operation again. If "H/W ERROR"
appears again, consult your nearest service center.
"BT ERROR PLS Update the Bluetooth firmware. ( 4)
UPDATE"
If you still have troubles, reset the unit. ( 3)
22

SPECIFICATIONS

FM Frequency Range
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
AM Frequency Range
Usable Sensitivity (S/N = 20 dB)
Laser Diode
Digital Filter (D/A)
Spindle Speed
Wow & Flutter
Frequency Response (±1 dB)
Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range
Channel Separation
MP3 Decode
WMA Decode
AAC Decode
87.5 MHz — 108.0 MHz (50 kHz step)
0.71 μV/75 Ω
2.0 μV/75 Ω
30 Hz — 15 kHz
64 dB
FM 40 dB
MW 531 kHz — 1 611 kHz (9 kHz step)
LW 153 kHz — 279 kHz (9 kHz step)
MW 28.2 μV
LW 50 μV
GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
105 dB
90 dB
85 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
AAC-LC ".m4a" files