Menu Options - Datavideo HS-2200 Quick Start Manual

Menu Options

* This table is under HD 1080i mode values.
Version No
1. Mode
2. On Preview Settings
3. Input 5 and 6 Mode
4. Outputs Sources
5. Aux Selection
Note: Each input can selected for Count Down ON or OFF. If Count Down is ON then the Down
Counter value is set in minutes and seconds (MM:SS) - Max.= 1 Hour or 60:00,
Default = 15 Seconds or 00:15
When the ENTER button is pressed the Main Menu list is displayed on the HDMI 1
Multi-view output.
This section covers the Menu options in the order that they appear on the HS-2200
HDMI 1 Multi-view. These settings may also appear in more detail elsewhere in this
instruction manual. Options may vary depending on the firmware version in use.
Once the chosen setting has been confirmed with the ENTER button it is stored
within the switchers non-volatile memory.
Where xx.xx is the firmware version number
1080i
720p
SD 4:3
SD 16:9
Video Settings
Audio Settings
Count Down Settings
Input 5
Input 6
Output 1~6
AUX 1~4
The Video can be changed to the desired
standard.
Brightness
Contrast
Saturation
Aperture
Y-C Delay
Set to Nominal
Level
Set To Nominal
Down Counter is on
Count Down Value
SDI
HDMI
HDMI Color Mode
OUT 1~6 is user choice of :
Program
Program Logo Free
Program Logo & DSK Free
Preview
Aux 1~4
Multi Screen
1~6
20
Range 072 to 184
Range 36 to 92
Range 36 to 92
0~3
0~3
Reset to default values
RGB
YUU_422
YUV_444