Figure 66 A Single Pc Connected To Your Stpro - Alcatel Speed Touch Pro User Manual

11 Configuring IP
Sample configuration:
single PC
Sample configuration:
small workgroup
230 / 340
In the below figure, a simple configuration is given:
One PC attached to the
It is most applicable to PPPoA to PPTP Relaying.
IP address : 10.0.0.138
(Sub)netmask : 255.255.0.0
Default Gateway : none
Figure 66 A single PC connected to your STPro.
You can setup a local workgroup around the
the figure below.
IP address : 172.16.0.2
(Sub)netmask : 255.255.0.0
Default Gateway : 172.16.0.4
IP address : 172.16.0.4
(Sub)netmask : 255.255.0.0
Default Gateway : none
Figure 67 A work group connected to your STPro.
Note: Notice that the default gateways in the PCs/workstations
point to the
.
IP Network 10
IP Network 172.16
.
IP address : 10.0.0.1
(Sub)netmask : 255.255.0.0
Default Gateway : none
as shown in
IP address : 172.16.0.1
(Sub)netmask : 255.255.0.0
Default Gateway : 172.16.0.4
IP address : 172.16.0.3
(Sub)netmask : 255.255.0.0
Default Gateway : 172.16.0.4
3EC 17059 AAAA TCZZA Ed. 01