Connecting The Sacd Standard; Connecting The Sacd Standard To Your System; Connection Steps - Krell Industries CD Player User Manual

Super audio compact disc player
Table of Contents

Advertisement

Connecting the SACD Standard

to Your System
USING BALANCED
CONNECTIONS
Connection
Steps
14
Krell recommends using balanced interconnect cables. Balanced
interconnect cables not only can minimize sonic loss but are also
immune to induced noise, especially with installations using long
cables. Balanced connections have 6 dB more gain than single-
ended connections. When level matching is critical, keep this gain
value in mind.
TABLE 1 Analog and Digital Connections
for the SACD Standard
CD Format
Conventional CD
Two-channel SACD
Multi-channel SACD
Follow these steps to connect the SACD Standard to your system.
1.
Make sure all power sources and components are off before
connecting inputs and outputs.
2.
Neatly organize the wiring between the SACD Standard and all
system components. Separate AC wires from audio cables to
prevent hum or other unwanted noises from being introduced into
the system.
3.
Remember that balanced outputs use three-pin XLR connectors.
Single-ended outputs use RCA connectors. Maintain the correct
left/right orientation of these outputs.
4.
To play an SACD, you need to use analog audio outputs. Digital
audio outputs are only available for conventional compact discs.
For multi-channel (
tional compact disc playback, connect the SACD Standard multi-
channel analog audio outputs to the surround preamp/processor
multi-channel inputs. All multi-channel analog audio outputs are
available in the
MULTI
surround (
) multi-channel outputs are not available in the
SL, SR
or
formats. The left (
SACD
are always active.
5.
For two-channel and conventional compact disc playback only,
connect the SACD Standard balanced analog audio outputs or
the left (
) and right (
L
balanced or single-ended analog audio inputs.
Analog Output
Balanced
Single-ended
L+ R
YES
YES
YES
YES
YES
YES
) SACD, two-channel (
MULTI
format. The center (
) and right (
) multi-channel outputs
L
R
) multi-channel outputs to the preamplifier
R
Digital Output
Optics
Coax
Multi
NO
YES
YES
NO
NO
NO
YES
NO
NO
), and conven-
SACD
), subwoofer (
) and
C
SW
Krell SACD Standard
CD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sacd standard

Table of Contents