Fc Mod - Vocoder - Korg Synthesizer/Vocoder microKORG Owner's Manual

SOURCE [AMP EG, LFO 1, LFO 2,
Velocity, KBD Track,
Pitch Bend, MOD.Wheel]
Selects the modulation source that
will be applied to the carrier band-
pass filter "CUTOFF."
For example if you select AMP EG
( ), the Amp EG will be the
modulation source.
AMP EG ( ): AMP EG
LFO 1 ( ): LFO 1
LFO 2 ( ): LFO 2
Velocity ( ):
Velocity (keyboard playing
strength)
KBD Track ( ):
Keyboard tracking (keyboard posi-
tion)
Pitch Bend ( ):
PITCH wheel
MOD.Wheel ( ):
MOD wheel
36
7. FC MOD
— VOCODER
These parameters select the modulation source that will vary the cutoff frequency of the carrier band-pass filter (the synthesis filter), and
specify the depth of the modulation. For example if you set the modulation source "SOURCE" (knob 1) to AMP EG (A.EG) and use "INTEN-
SITY" (knob 2) to adjust the depth of the effect, the AMP EG will produce tonal changes.
INTENSITY [-63...63]
Specifies the depth of the modula-
tion that is applied to the carrier
band-pass filter "CUTOFF."