Table of Contents
Advertisement
Customizing the function settings
Setting details
Parental control setting
Some discs are specified not suitable for children. Such
discs can be limited not to play back with the unit.
1) Press C or D to select "Parental", then press B
or A until the level you require appears.
Level Off: The parental control setting does not
•
function.
•
Level 8:
Virtually all DVD software can be played
back.
•
Level 1:
DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select "Password".
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
If you input a wrong number, press CLEAR.
•
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can-
not be changed unless you enter the correct pass
word.
4) Press OPEN/CLOSE to activate Parental control
setting. (See "Temporary disabling of rating level by
DVD disc" on page 59.)
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
To change the parental level
1) Press C or D to select "Password".
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select "Parental", then press B
or A to change the parental level.
5) Press C or D to select "Password", then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
"No Disc" appears on the screen.
58
assword
----
arental
Off
Select Files
All
Output
RGB
/0Ð9/Enter/Clear/Setup/Return
4. While holding 7 down on the remote control and
then press STOP on the front panel. "PASSWORD
CLEAR" appears on the screen.
5. Enter a new password again.
Select Files
When playing back a CD containing a mixture of MP3
and JPEG files, only MP3 or JPEG files can be displayed
on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3 files.
Pictures Only:
Displays only JPEG files.
Output
You can select the video output signal of the DVD/VCR
to the TV from "RGB", "Component" or "Progressive".
RGB:
Select when connecting to an RGB or composite
TV.
Component:
Select when connecting to a TV equipped with
component video inputs but progressive scan is
not compatible.
Progressive:
Select when connecting to a TV equipped with
component video inputs, progressive scan
compatible.
Warning:
Once "Progressive" is selected when connecting to a
TV progressive scan incompatible, no image will be
seen on the video display.
In this case, you must reset the unit by pressing the
STOP button on the front panel for five seconds. The
video output will be restored to "RGB" setting, and a
picture will once again be seen on a conventional
analog display. (You may need to make the Scart
connection if you connect a TV, progressive scan
incompatible, with component lead only.)
Notes:
• Some discs may not be played back with the progres-
sive scanning mode correctly because of the disc
characteristics or recording condition.
• Once Progressive scan on, all other video outputs are
disabled except component video outputs.
Note:
If each setup (pages 56~58) has been completed, the unit
can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
Advertisement
Table of Contents
