Table of Contents
Advertisement
The Fine Tuning adjustment
Under a normal receiving condition, the
station-search will stops automatically at
the best receiving position. That picture
will appear without disturbance.
This receiving position will be memorized
automatically. The Fine Tuning cannot be
memorized additionally.
In rare case of bad receiving condition,
the station-search might not stop at the
best receiving position. That picture will
appear with disturbance, e.g. waving
lines.
Only in this rare case, use the Fine
Tuning to tune the concerned station
manually and exactly.
In step 6, press
or
until the station
is adjusted to best position. Then press
ENTER.
Manual TV station presetting
5
Press
(higher frequencies) or
The search starts. It stops at each broadcast automatically
(" 1 " change to "
or
repeatedly until the
station you want appears. Only
in case of receiving of the weak
broadcast (drifting picture),
search dose not stop. If you
want to stop, press
/
.
6
Please wait until OK :ENTER
appears. It may take a few sec-
onds.
Then press ENTER.
In the next step, the program
position on which this station
should be stored will be set.
7
Press
or
repeatedly until
"5" displayed.
Or enter 5 with 10 number
buttons. Then press ENTER.
8
Repeat the steps 3 and 7 to preset other TV stations.
9
Press VCR MENU repeatedly until the TV picture appears on
the screen.
(lower frequencies) once.
"). Press
D/K
DE OFF
/
or
SEAR H :
EXIT
:
MENU
D/K
DE OFF
SEAR H :
OK
:
ENTER
D/K
DE OFF
H
:
OK
:
ENTER
H 1
/ F. TUNE :
H 1
/ F. TUNE :
EXIT :
MENU
H 5
/ 0 9
EXIT :
MENU
23
Advertisement
Table of Contents
