Safety Instructions; Battery; Operation; Cleaning And Maintenance - TrekStor DataStation PocketAir User Manual

5

Safety instructions

It is essential to observe the following safety instructions!
a Technical work on the product can be performed only by qualified persons. The
product may neither be opened nor changes be carried out to it. The
components cannot be serviced by the user.

5.1 Battery

a Charge the battery only in a temperature range from 5° to 35° C.
a Do not charge the DataStation, if the battery is damaged or leaking.

5.2 Operation

a Do not cover the DataStation during operating or charging. This can lead to
overheating.
a Only operate the device in the temperature range of 5 ° to 35 ° C..
a Turn off power immediately if it becomes wet. Let the unit check before using
the device again.
a Do not move the device while the integrated hard disk drive is active. This can
result in data loss or damage to the hard disk drive. Operate the device on a
stable surface. Ensure horizontal operation (LED indicators on top).
i Protect the DataStation from strong sunlight, extreme temperatures, moisture,
high humidity, corrosive substances or vibration.
i In certain circumstances, exposing the device to an electrostatic discharge may
interrupt the data transfer and impair the functions of the device. If this occurs,
all cables should be unplugged and Wi-Fi disconnected. Then connect again.
i Do not use USB cables longer than 3 meters.

5.3 Cleaning and maintenance

i Maintain a dust free environment when using or storing the device.
i Never clean the surface of the device with solvents, paint thinners, cleansers or
other chemical products. Instead, use a soft, dry cloth or soft brush.
9