Using The Datastation As An External Usb Hard Drive; Using The Datastation As A Network Storage; Installing Pocketairfinder - TrekStor DataStation PocketAir User Manual

8

Using the DataStation as an external USB hard drive

Ensure that the DataStation is turned off. Connect your DataStation via the included
USB 3.0 cable to a computer. In activity, the HDD status LED lights up white (USB 2.0
connection) or blue (USB 3.0 connection). The DataStation is now shown as an
external drive "T
REK
i Note: While the HDD is in power saving mode, a simultaneous charging of the
internal battery is shown by flashing the status LED battery. This is about 4 minutes
without access.
9

Using the DataStation as a network storage

9.1 Installing PocketAirFinder

The PocketAirFinder software helps you to get comfortable access to DataStation
from your PC or Mac via LAN or WI-FI. You'll find it on your DataStation in the main
directory or even on the product page www.trekstor.de. Copy the software to the
desktop or a folder of your choice.
•
Connect the DataStation with a network cable to your network. (for LAN only)
•
Push the )-button (F) to switch on the DataStation.
•
Double-click to start PocketAirFinder and follow the instructions.
•
To start the program, please confirm window appearing with "Y
•
After a short time the name of your DataStation appears with its IP address.
i Note: If the name does not appear, click the "R
.
WINDOW
•
Click on the name of your DataStation. It is now selected and highlighted in
blue.
•
Click on "M
Y
•
Enter your username and password. The default username is "admin" and the
password field is left blank.
•
Confirm the input by clicking "
•
This opens a window with a folder icon of the DataStation.
S ". You can now transfer data.
TOR
S ".
TORAGE
EFRESH
".
OK
ES
" P
BUTTON OF OCKET
".
A F ´
IR INDER S
12