Bcf; Bct - AMX Modero G5 Instruction Manual

Button State Commands (Cont.)

?BCF

Get Fill Color Command. Get the current fill color.
Syntax:
Variables:
Example:

^BCT

Set Text Color Command. Set the text color to the specified color.
Only if the specified text color is not the same as the current color.
Note: Color can be assigned by color name (without spaces), number or R,G,B value (RRGGBB or
RRGGBBAA).
Syntax:
Variables:
Example:
Modero G5 Touch Panels - Configuration and Programming
"'?BCF-<vt addr range>,<button states range>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons, 1 = Off state and 2 =
On state).
custom event type 1012:
Flag - Zero
Value1 - Button state number
Value2 - Actual length of string (should be 9)
Value3 - Zero
Text - Hex encoded color value (ex: #000000FF)
Text length - Color name length (should be 9)
SEND COMMAND Panel,"'?BCF-529,1'"
Gets the button 'OFF state' fill color information.
The result sent to the Master would be:
ButtonGet Id = 529 Type = 1012
Flag = 0
VALUE1 = 1
VALUE2 = 9
VALUE3 = 0
TEXT = #FF8000F
"'^BCT-<vt addr range>,<button states range>,<color value>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons, 1 = Off state and
2 = On state).
color value = Refer to RGB Triplets and Names For Basic 88 Colors on page 114 for more information.
SEND_COMMAND Panel,"'^BCT-500.504&510,1,12'"
Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color name, R,G,B,
alpha colors (RRGGBBAA) and R, G & B colors values (RRGGBB). Refer to RGB Triplets and Names For
Basic 88 Colors on page 114 for more information.
Programming - Send Commands
81