Elation EVLED256 Video Wall Quick Start Manual page 9

Hide thumbs Also See for EVLED256 Video Wall:

5. Mapping and setup: (For example: to map 3 rows and 3 columns, setup should be as pictured below)

Update the quantity of screens if using more than one main screen→In "Type", select "virtual pixel display"→set rows and columns for your

screen→select pixel points of each panel (The pixel points for each EVLED256 is 16x16)→set the map based on the signal connection (Z type

connection as pictured below). Follow steps 1 – 9 in order.

(3). Type: select "virtual pixel display"

(7). Signal connection:

(Front view data connection)

(6). Input the number of pixel points for each panel. The EVLED256

Panel should be set as 16 Width by 16 Height.

(1). Input number of screens

(4). Number of panels wide

(5). Number of panels high

(8). Send settings to sending card.

(2). Click "Update display QTY"

(9). Save parameter to sending card.