Troubleshooting - Monster Power HTS1000MKIII Owner's Manual

Symptom
The PowerCenter
is not receiving power.
12

TROUBLESHOOTING

Possible Cause
The PowerCenter
is not turned On.
Too many devices
are connected, causing
an overload, tripping
the Thermal Circuit Breaker.
Remedy
• Turn the PowerCenter switch on.
• Make sure the PowerCenter's AC power plug
is plugged into a properly grounded
120 volts (nominal) wall outlet.
• In some households, a wall switch may
need to be thrown to make the wall plug
active. Try turning on the light switches
located near the wall unit.
• Press the PowerCenter Thermal Circuit
Breaker button in to reset. Please allow
10 minutes before attempting to reset.
If you reset too soon, the breaker will
prematurely sense power overload
and not allow unit to operate.
• If the Circuit Breaker continues to trip,
try moving one or more components
to another PowerCenter. You may be drawing
too much current through one PowerCenter.