Troubleshooting - Monster Power PowerCenter HTS 1600 Owner's Manual

Symptom
The PowerCenter is
not receiving power.
14

TROUBLESHOOTING

Possible Cause Remedy
The PowerCenter • Turn the PowerCenter switch on.
is not turned On.
• Make sure the PowerCenter's AC power plug
is plugged into a properly grounded
120 volts (nominal) wall outlet.
• In some households, a wall switch may need
to be thrown to make the wall plug active.
Try turning on the light switches located
near the wall unit.
Too many devices are • Press the PowerCenter Thermal Circuit
connected, causing an Breaker button in to reset. Please allow
overload, tripping the
10 minutes before attempting to reset.
Thermal Circuit Breaker.
If you reset too soon, the breaker will
prematurely sense power overload
and not allow unit to operate.
• If the Circuit Breaker continues to trip,
try moving one or more components
to another PowerCenter. You may be drawing
too much current through one PowerCenter.