Saeco Incanto sirius Operating Instructions Manual page 41

This function, which may be enabled or disabled
by the user, is used to program the machine to go
on and off at a specifi c time.
ON: indicates the switch on time.
OFF: indicates the switch off time.
Pressing the "OK" button will memorise the set
value and make the next parameter available for
adjustment.
This is a factory-set function that automatically
switches the machine into "Standby" when 3 hours
have elapsed since a coffee was dispensed.
The function is disabled when the "CLOCK"
function is on.
The switch-off time can be adjusted, in 15-minute
intervals, to a minimum of 15 minutes.
This function is used to rinse all the coffee-
dispensing parts with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged
from the coffee brew unit. Before starting, empty out
the drip tray and keep an additional container handy.
PROGRAMMING MACHINE FUNCTIONS
TIME SETTINGS
CLOCK TIME
CLOCK
TIME SETTINGS
ON/OFF TIME
Select the MENU. When the function ap-
pears, select it using
the "OK" button.
TIME SETTINGS
CLOCK
ON/OFF TIME
TIME SETTINGS
TIMER
Select the MENU. When the function ap-
pears, select it using the
"OK" button.
CLEANING
CLEANING CYCLE
DESCALING CYCLE
CLEANING
Select the MENU. When the function ap-
pears, select it using
the "OK" button.
ON/OFF TIME ON/OFF TIME
ON 08 : 25 ON 08 : 25
OFF 09 : 45
Set the hour and Set the
minutes and memorise minutes and memorise
by pressing "OK". by pressing "OK".
TIMER TIMER
3:00 1:15
Use the buttons to Press the "OK" button to
adjust the timer setting. confi rm your choice.
CLEANING CYCLE CLEANING CYCLE
YES YES
NO NO
Choose whether to Press the "OK" button
enable or disable the to confi rm your choice.
rinsing cycle.
41
hour and