Table of Contents
Advertisement
14
en | Installing and connecting
4.8
Connecting the power supply
CAUTION!
Only operate the VOT-320 in combination with a SELV power
supply unit that meets the following specifications: 24 VAC
output voltage, min. 33.6 VA without pan/tilt.
Please observe the labeling on the camera module of the
VOT-320 and the correct position for the terminal block.
–
–
–
F.01U.245.673 | V4.5 | 2011.09
Connect the power supply unit cables to the terminal
block.
Connect the terminal block to the orange socket on the
VOT-320.
Insert the power supply unit plug into a suitable socket.
Quick Installation Guide
Bosch Sicherheitssysteme GmbH
VOT-320
Advertisement
Table of Contents
