Automatic Installation Using The Installer; Refer To - Konica Minolta IC-202 Quick Manual

Installing the Printer Driver

Automatic Installation Using the Installer

Method to install the printer driver automatically with the installer is de-
scribed.
Printer Driver
KONICA MINOLTA PCL
KONICA MINOLTA PS
Note
Since this machine is automatically detected with a network connection,
be sure to set the IP address of this machine before connecting it. For de-
tails on specifying the settings, refer to "Setting the IP Address for This
Machine" on page 3-5.
When installing on Windows NT 4.0, 2000, XP, Server 2003, XP x64 or
Server 2003 x64, administrator permissions are required.
If the wizard starts up in order to add new hardware with a USB or parallel
connection, click [Cancel].
For IPP printing, it is not necessary to install the printer driver at this time
since IPP printing setup is performed when the printer driver is installed.
For further details on IPP printing, refer to "IPP Printing (Windows 2000/
XP/Server 2003/XP x64/Server 2003 x64)" on page 3-13.
IC-202

Refer To

"Automatic Installation Using the installer

(PCL)" on Page 2-4
"Automatic Installation Using the Installer
(KONICA MINOLTA PS)" on Page 2-8
2
2-3