Status, Error And Service Messages - Konica Minolta 2300 Service Manual

(2) Working with the Printer Menu
Performs an AIDC (Auto Image Density Control) calibration
cycle. Wait until the test is finished, the Ready indicator on the
Power On Test
control panel lights up, and the Error indicator goes off (less than
150 seconds).
Maintenance
Adjusts the density of the second side of the paper when duplex
Duplex Density
printing.
Sets the length of time until the printer enters Energy Saver
mode after it no longer receives print jobs or is not operated. If a
Energy Saver print job is received while the printer is in Energy Saver mode,
the printer warms up, then returns to normal print mode before
starting to print.
When set to On, causes the printer to continue printing even if
the specified tray is not loaded with paper of the correct size. If
Auto Continue
the Auto Continue setting is changed during printing, the setting
remains valid for future print jobs.
Allows you to replace a toner cartridge.
From the list, select the color of the toner cartridge to be
replaced.
Toner Replace...
Select the capacity of the toner cartridge (1500 or 4500).
Click OK.
Open the front door, and then replace the toner cartridge.
Prints an LED status sheet, which lists all LED combinations and
Print Status Sheet
their related printer status and error conditions.
4-5.

Status, Error and Service Messages

• Status, error, and service messages are displayed in the Status Display. They provide
information about your printer and help you locate many problems. When the condition
associated with a displayed message has changed, the message is cleared from the Sta-
tus Display message window.
(1) Standard Status Messages
This message...
Canceling Job The job is being cancelled.
The printer is in Energy Saver mode to reduce power consump-
Energy Saver tion during periods of inactivity. When a print job is received, the
printer returns to normal power within 180 seconds.
Printer Idle The printer is on and ready to receive data.
Printing The printer is printing.
Processing The printer is processing data.
Warming Up The printer is warming up.
means...
144