Table of Contents
Advertisement
[3]
[A]
[5]
[4]
3.1.13.3 Removing the Rear Cover
FAX-L100 / FAX-L120
1) Remove the 2 screws [1].
2) Free the 2 claws [2], and detach the rear cover [3] while sliding it in
the direction of the arrow.
[2]
3.1.13.4 Removing the Cartridge Cover
FAX-L100 / FAX-L120
1) Free the link stop [2] from the door link [1].
2) Remove the 2 screws [3], and detach the cartridge cover [4].
[4]
When mounting the cartridge cover, be sure to fit the 2 fixing assembly
release hooks [2] in the 2 hook holes [1] found in the cartridge cover.
[2]
[1]
[B]
F-3-60
0010-3636
[1]
[3]
F-3-61
0010-3637
[2]
[1]
[3]
F-3-62
[1]
[2]
Bad position
3.1.13.5 Removing the Rear Plate
FAX-L100 / FAX-L120
1) Remove the screw [1], and detach the rear plate [2] in the direction of
the arrow.
[1]
3.1.13.6 Removing the Paper Leading Edge/Paper Width
Sensor PCB
FAX-L100 / FAX-L120
1) Disconnect the 6 connectors [1], and free the harness [3] froma hte
harness guide [2].
2) Free the 2 claws [4], and detach the paper leading edge/paper width
sensor PCB [5].
[2]
[5]
[4]
Chapter 3
[1]
[2]
Good position
F-3-63
0010-3638
[2]
F-3-64
0010-3639
[3]
[2]
[1]
[1]
[1]
F-3-65
3-13
Advertisement
Table of Contents
