Table of Contents
Advertisement
Chapter 3
6) Free the craw [3], and detach the high-voltage power supply board
[4].
[1]
3.1.12 DC/DC Converter Board
3.1.12.1 Removing the Right Cover
FAX-L100 / FAX-L120
1) Open the document feeder tray [1].
2) Open the cartridge cover [2].
3) Remove the screw [3].
4) Free the 3 claws [4], and open the right cover [5] in the direction of
the arrow [A].
5) Free the claws [6], and detach the right cover [5].
[1]
[6]
3.1.12.2 Removing the DC/DC converter board
FAX-L100 / FAX-L120
1) Disconnect the connector [1] and the flat cable [2].
2) Free the harness [4] from the clamp [3].
3) Disconnect the connector [5].
4) Remove the screw [6], and detach the DC/DC converter board [7].
3-12
[3]
[4]
[2]
F-3-56
0010-3610
[2]
[4]
[3]
[A]
[4]
[5]
F-3-57
0010-3611
[4]
[3]
[6]
[5]
3.1.13 Top Sensor
3.1.13.1 Removing the Right Cover
FAX-L100 / FAX-L120
1) Open the document feeder tray [1].
2) Open the cartridge cover [2].
3) Remove the screw [3].
4) Free the 3 claws [4], and open the right cover [5] in the direction of
the arrow [A].
5) Free the claws [6], and detach the right cover [5].
[1]
[6]
3.1.13.2 Removing the Left Cover
FAX-L100 / FAX-L120
1) Open the document feeder tray [1].
2) Open the cartridge cover [2].
3) Remove the 2 screws [3].
4) Free the 4 claws [4], and detach the Left cover [5] in the direction of
the arrow [A]; then, slide it in the direction of the other arrow [B].
[7]
[1]
[2]
F-3-58
0010-3634
[2]
[4]
[3]
[A]
[4]
[5]
F-3-59
0010-3635
Advertisement
Table of Contents
