Basic] Tab; Layout] Tab; Stamp/Composition] Tab; Quality] Tab - Konica Minolta BIZHUB C220 User Manual

4.2 Settings
4.2.3

[Basic] tab

Item Name
[Original Orientation]
[Original Size]
[Paper Size]
[Zoom]
[Authentication/Account
Track...]
4.2.4

[Layout] tab

Item Name
[Combination]
[Skip Blank Pages]
4.2.5

[Stamp/Composition] tab

Item Name
[Watermark]
4.2.6

[Quality] tab

Item Name
[Font Settings...]
4.2.7

[Configure] tab

Item Name
[Device Option]
[Obtain Device Information]
[Obtain Settings...]
[Encryption Passphrase]
Reference
- To display the [Configure] tab, right-click the icon for the installed printer with a name like "xxxxxxx
FAX", and then click [Properties].
bizhub C360/C280/C220 (Version 3)
Functions
Select the orientation of the original to be sent.
Select the paper size of the original to be sent.
Select the size of the paper to be sent. If it is different from the original size,
the output image will be automatically enlarged or reduced.
Select an enlarge or reduce ratio.
Click this button to specify the user name and password when [User Au-
thentication] is enabled on this machine, or the account name and pass-
word when [Account Track] is enabled on this machine.
Functions
Select this check box to combine the pages contained in a document with
multiple pages on to one sheet, or divide a single page original on to mul-
tiple sheets when sending. Clicking [Combination Details...] allows you to
configure details.
Select this check box to avoid sending any blank pages.
Functions
Select this check box to send the document with a watermark (character
stamp) overlapped. Clicking [Edit...] allows you to create, change, or de-
lete watermarks.
Functions
Select whether the fonts to be downloaded from a computer to this ma-
chine are bitmap fonts or outline fonts. In addition, specify whether to re-
place the TrueType fonts by printer fonts when sending a fax from this
machine.
When garbled characters are detected in the destination, set download
fonts to bitmap fonts, and also set printer fonts to OFF.
Functions
Configure the status of the options installed on this machine and user au-
thentication/account track. Specify the status of each item in the [Setting]
box.
Click this button to communicate with this machine and load the status of
the installed options.
Click this button to configure conditions such as the destination from
which you acquire the device information.
Select this check box and enter the encryption passphrase in the text box
when it is user-defined for communication with this machine.
4
4-13