ELNA expressive 940 Instruction Manual page 69

⁄0
Grid size
Maximum speed setting
600spm
Hoop for Monogramming
0.8mm
⁄1
Grid size
Maximum speed setting
600spm
Hoop for Monogramming
0.8mm
⁄2
Grid size
Maximum speed setting
600spm
Hoop for Monogramming
0.8mm
⁄3
Grid size
Maximum speed setting
600spm
Hoop for Monogramming
0.8mm
q
10 mm
M1
q
10 mm
M1
q
10 mm
M1
q
10 mm
M1
⁄0 Grid size
The grid size of the editing screen can be changed by
pressing the circle key next to "+" or "–".
You can select one of 3 sizes, 10 mm, 20 mm and
30 mm.
To hide the grid, select "OFF".
q Circle keys (+, –)
⁄1 Maximum sewing speed
The maximum speed of embroidery can be changed
from 400 to 800 spm by 100 spm intervals.
Press the circle key next to "+" or "–" to select the
desired speed.
q Circle keys (+, –)
⁄2 Hoop selection for monogramming
Press the circle key next to "+" or "–" to select the
default hoop for monogramming from the followings.
q Circle keys (+, –)
M1: MB hoop 240 x 200
M2: MB hoop 126 x 110
M3: MB hoop 50 x 50
T1: Tajima hoop 24 x 24 mm (933100239A00*)
T2: Tajima hoop 38 x 38 mm (933100439A00*)
T3: Tajima hoop 59 x 59 mm (933100639A00*)
T4: Tajima hoop 79 x 79 mm (933100839A00*)
T5: Tajima hoop 100 x 100 mm (933101039A00*)
T6: Tajima hoop 39 x 160 mm (933200239A00*)
(*Tajima part number, optional item)
⁄3 Thread trimming position
If threads are not trimmed properly, adjust the needle
drop position where the threads being trimmed.
Press the circle key next to "+" or "–" to set a distance
between the thread trimming position and the last
stitch of the pattern section or select [OFF] to turn off
the function.
q Circle keys (+, –)
The adjustable range is from 0.5 to 1.0.
Press the OK key to register the new settings.
Or press the next page key to go to the next page.
65