Jump Thread Trimming On/Off; Jump Thread Trimming Threshold; Thread Trimming Position - ELNA expressive 940 Instruction Manual

12 ON
13 3
14 0.8

[12] Jump thread trimming ON/OFF

If you wish to trim jump threads automatically, press
the fright arrow button
Press the left arrow button
thread trimming.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[13] Jump thread trimming threshold

You can adjust number of jumps, which triggers the
jump thread trimming.
The machine will trim the jump thread automatically
after the specified number of jump stitches.
Press the right or left arrow button
the number of jumps.
The adjustable range is from 1 to 8.

[14] Thread trimming position

If threads are not trimmed properly, adjust the needle
drop position where the threads being trimmed.
Press the right or left arrow button
distance between the thread trimming position and
the last stitch of the pattern section or select [OFF] to
turn off the function.
The adjustable range is from 0.5 to 1.0.
Press the ENTER button to register the new setting.
If you wish to cancel the changes, press the MODE
button and LCD screen will return to the My setting
mode display without registering the settings.
60
to indicate [ON].
to disable the jump
to go to the next
to adjust
to set a