Customizing The Settings With The Sub Control Panel; Buzzer Sound Control; Eco Mode Setting; Machine Id Number - ELNA expressive 940 Instruction Manual

Machine OP
q
01
02 10
03
w
5
1

Customizing the Settings with the Sub Control Panel

Press the MODE button until the LCD screen shows
MB-4 OP blinking.
Press the ENTER button to start the My setting mode.
q MODE button
w Enter button

[01] Buzzer sound control

Press the right or left arrow button
loudness of the buzzer.
To mute the buzzer, set the value to [ 0].
Press the ENTER button to register the new setting
or press the upward arrow button
next setting.

[02] Eco mode setting

The sewing lights will turn off, and the LCD screen go
dark if you have not used the machine for a while.
Pressing any button will turn on the sewing lights and
screen.
The eco mode timer can be set from 1 to 30 minutes
by pressing the right or left arrow button
Press the ENTER button to register the new setting
or press the upward arrow button
next setting.

[03] Machine ID number

When connecting two or three machines to the PC at
the same time, you need to assign the identification
number to each machine.
Press the right or left arrow button
the ID number.
Press the ENTER button to register the new setting
or press the upward arrow button
next setting.
NOTE:
Press the downward arrow button
the previous setting.
57
to adjust
to go to the
.
to go to the
to select
to go to the
to go back to