Use Ir Remote Controller - Dcm MC-HD100 User Manual

USE IR Remote Controller

When the camera is working, you can use
remote controller to perform panning, tilting,
zooming and focusing, store and call back preset
positions.
Button Instruction：
1. In this instruction, 'press the button' means
the press and relax the two actions. Such as 'press
[HOME] button' means to press the [HOME] key
and then relax action, and a special note will be
given if a hold down for more than one second is
required.
2. When a button-combination is required, do it
in sequence. For example, '[*] + [#] + [F1]'means
press [*] first and then press [#] and press [F1] at
last.
1. Pan/Tilt Control
Move up:
Move down:
Move left:
Move right:
Face the camera back to front: Press [HOME]
Press and hold the up/down/left/right button,
the camera will keep rotating from slow to fast, until
it run to the mechanical limit; the camera stops as
soon as the button is released.
2. Zoom
Zoom Out: press [ZOOM ] button
Zoom In:
Press and hold the button, the camera will keep
zooming in or zooming out and it stops as soon as
the button is released.
13
Press [ ]
Press [ ]
Press [ ]
Press [ ]
press [ZOOM ] button