Features - Dcm MC-HD100 User Manual

Hd video conferencing camera
Table of Contents

Advertisement

Features

1. The camera provides a high performance in low illumination situations, particularly suitable for which
room's lighting is not very well.
2. With maximum resolution of 1920 x 1080 and output frame rate up to 60 or 50 frames / sec, this camera
provides high-definition as well as fluent video.
3. The camera video signal to noise ratio directly affects the image compression coding efficiency for
high-definition video conference terminals. With new low-noise CMOS American sensor, the camera applies 2D
and 3D noise reduction at the same time based on motion estimation algorithm, and effectively reduces the noise.
4. The camera applies a unique Iridix dynamic exposure control algorithm, which is based on retina model.
Good exposure makes the picture nature and creates a strong sense of space. The CMOS sensor also support WDR
(Wide Dynamic Range) mode. With Iridix treatment, camera's WDR is capable of capture all features of images
when there is a strong contrast between subject and background (such as backlight conditions).
5. 18x optical zoom.
6. Three type of video output interface: DVI (HDMI、YPbPr) interface, HD-SDI interface (Optional).
7. Infrared remote control signals pass through function. The camera is capable of receiving signal from the
infrared remote controller, and passes through to the video conferencing terminal via RS232 IN connector.
8

Advertisement

Table of Contents
loading

Table of Contents