Ir Remote Controller Explanation - Dcm MC-HD200 User Manual

IR Remote Controller Explanation

0. Standby Button
Press this button to enter standby mode. Press it again
to enter normal mode.
(Note: Power consumption in standby mode is
approximately half of the normal mode)
1. Position Buttons
To set preset or call preset
2. * Button
3. Set/Clear Preset Buttons
Set preset: Store a preset position
[SET PRESET] + Numeric button (0-9):Setting a
corresponding numeric key preset position
Clear preset: Erase a preset position
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the preset
Or: [#]+[#]+[#]: Erase all the preset
4. BLC (Backlight Compensation) Button
BLC ON/OFF: Press this button to enable the
backlight compensation. Press it again to disable the
backlight compensation.(NOTE: Effective only in
auto exposure mode)
Notice: If a light behind the subject, the subject will
11