Use; Turning On And Off; Operating / Residual Heat Indicator - Miele KM 421 Operating Instructions Manual

Turning on and off

Operating a variable / extended
burner
If a burner has the symbol n next to
the control knob, you can switch on an
additional outer or extended heating
circle.
To turn on a burner push down and turn
the control knob:
– clockwise to the desired setting turn
on one heating circle,
– counter-clockwise to the desired
setting to turn on both heating cir-
cles.
If both heating circles are turned on an
indicator light will come on left of the
control knob.
To adjust the setting, turn the knob
without pressing down.
The burner is turned off by turning the
control knob clockwise or coun-
ter-clockwise to "0".
Operating a single burner
A burner without the symbol n next to
the control knob is turned on by push-
ing the control knob down and turning it
clockwise or counter-clockwise to the
desired setting.
To adjust the setting, turn the knob
without pressing down.
The burner is turned off by turning the
control knob clockwise or coun-
ter-clockwise to "0".
Operating / Residual heat
indicator
When a burner is turned on the corre-
sponding operating / residual heat indi-
cator will light up.
Do not touch or lay any heat sensi-
tive objects on the cooktop while the
operating / residual heat indicator is
still on.
Danger of burns and fire hazard!

Use

15