Chapter 2 Installation; Hardware Installation; Software Installation - TP-Link TL-WN721N User Manual

Chapter 2 Installation

2.1 Hardware Installation

There are two ways to install the Adapter:
1. Plug the Adapter directly to the USB port on your computer.
2. Connect the Adapter and your computer through the USB cable attached in package.
Note:
The promoted Found New Hardware Wizard screen will pop up when the adapter is installed
correctly. Click Cancel.

2.2 Software Installation

The adapter's Setup Wizard will guide you through the installation procedures for Windows XP,
Windows Vista, Windows 7, and Windows 8. The procedures in different systems are quite
similar, therefore here we use the procedures in Windows 7 as an example.
1. Insert the Resource CD into your CD-ROM drive, and the window below will appear. Select
model TL-WN722N. There will be a menu including: Install Driver&Utility and User
Guide. Click Install Driver&Utility to begin.
TL-WN721N/ TL-WN722N
Figure 2-1
4
Wireless N USB Adapter