Program In Rinse Hold Mode; End Of Program - Beko WMB 91242 DLSC User Manual

cancellation was made will remain lit and
"End" will appear on the screen.

Program in rinse hold mode

•
This process is shown with the
flashing Spin Symbol and the lit up
Standby Symbol.
If you wish to spin when the machine is in
this mode:
Adjust the spin speed. Press "Start/Pause/
Cancel" button. The program continues,
pumps out the water and spins. The
Standby Symbol fades out and Start
Symbol lights up.
If you want to discharge the water only
without spinning:
Press "Start/Pause/Cancel" button.
The Standby symbol will fade. The
Start symbol will light up. The program
continues and only drains the water.

End of program

When the program is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin and
temperature data selected at the start-up
of the program will remain selected. "End"
will appear on the display.
22
EN